Subaru WRX & WRX STI Manuals 2018 WRX & WRX STI Owner’s Manual | Page 110

2-14
Keys and doors/Keyless access with push–button start system
as “11122” or “12121” as a PIN code.
Doing so will increase the risk of
vehicle theft.
. When you try to register “22222”,
the registered PIN code will be deleted.
You cannot unlock the doors by PIN
Code Access until a new code is
registered.
. After registering a new PIN code,
make sure that you can unlock the
doors using the PIN code.
. When you delete the PIN code while
the keyless access function is dis-
abled, the keyless access function will
be enabled.
. Reregister the PIN code in the
following case.
– when you forget the PIN code
– when you want to change the PIN
code
! Unlocking
Perform steps 1 to 5 described in “Regis-
tration”. Case 2: When the access key fob has
been left in the operating range for 10
minutes or longer while all doors are
locked
NOTE ! Recovery from power saving mode
When one of the following is operated, the
keyless access function will be recovered.
Case 1:
. Unlock the doors by operating any
procedure other than gripping the front
passenger’s door handle
. Lock or unlock the doors
. Open a door and then close it
. You cannot unlock by PIN Code
Access in the following cases.
– when the access key fob is within
the operating ranges
– when the ignition switch is in the
“ACC” or “ON” position
. If you make an operation error
during the unlocking procedure, start
over with the unlocking procedure after
waiting for 5 seconds or longer.
. To protect your vehicle from theft, a
buzzer will sound if incorrect PIN codes
are entered five times continuously. If
this occurs, you cannot unlock the
doors by PIN Code Access for 5
minutes.
& Power saving function
The keyless access function will be
disabled in the following cases to protect
the battery of the access key fob and the
vehicle battery.
Case 1: When the keyless access func-
tion and the remote keyless entry system
have not been used for 2 weeks or longer
while all doors are locked
Case 2:
. Unlock the doors by gripping the door
handle
. Lock the doors by touching the door
lock sensor
. Lock or unlock the doors by using the
remote keyless entry system
. Lock or unlock the doors by using the
power door locking switch
. Open either of the front doors