Subaru WRX & WRX STI Manuals 2018 WRX & WRX STI Owner’s Manual | Page 109

Keys and doors/Keyless access with push–button start system
doors. NOTE
! Door unlock selection function
You can unlock only the door(s) that has/
have been selected.
You can change the setting as follows.
. Operate the multi-function display (col-
or LCD). For details, refer to “Keyless
Access setting” F3-61
. Have the setting changed by a
SUBARU dealer. PIN Code Access will be helpful if the
key is accidentally left in the vehicle. It
is recommended that a 5-digit security
code (PIN code) is registered.
& Unlock using PIN Code Ac-
cess
! Preparation for registering a PIN
code
1. Close all doors (including the trunk).
2. Press and hold the “ ” button on the
access key fob. Then all doors (including
the trunk) will be locked.
3. Keep the “ ” button pressed, and
press the trunk opener button within 5
seconds after step 2.
4. Press and hold the trunk opener
button for more than 5 seconds. Then a
chirp will sound.
5. Press the “ ” button on the access key
fob while the chirp sounds.
Then the chirp will stop and the prepara-
tion is complete.
NOTE
1)
Trunk opener button
While all doors are locked, you can unlock
the doors without a key by operating the
trunk opener button.
If you do not press the “ ” button on
the access key fob, the chirp will sound
for 30 seconds. In this case, the
preparation for registering a PIN code
does not complete even if the chirp
stops.
2-13
! Registration for a PIN code
For example, to register “32468” as the
PIN code, perform the following proce-
dure.
1. Press the trunk opener button three
times.
2. After a buzzer (ding) sounds once,
press the trunk opener button twice.
3. After a buzzer (ding) sounds once,
press the trunk opener button four times.
4. After a buzzer (ding) sounds once,
press the trunk opener button six times.
5. After a buzzer (ding) sounds once,
press the trunk opener button eight times.
6. Perform steps 1 to 5 again within
approximately 30 seconds after the buz-
zer starts sounding intermittently.
7. All doors will be unlocked and locked.
Then the PIN code will be registered.
NOTE
. If you make an error during the
registration procedure, open the dri-
ver’s door and then close it. Then, start
over from the procedure described in
“Preparation”.
. To protect your vehicle from theft,
you cannot register “00000”, “11111” to
“99999” or “12345” as a PIN code.
. Do not register your vehicle license
plate number or simple numbers such
– CONTINUED –