Subaru WRX & WRX STI Manuals 2015 WRX & WRX STI Owner's Manual | Page 157

3-32

Instruments and controls/Warning and indicator lights

& Turn signal indicator
lights

These lights show the operation of the turn
signal or lane change signal.
If the indicator lights do not blink or blink
rapidly, the turn signal bulb may be burned
out. Replace the bulb as soon as possible.
Refer to “Replacing bulbs” F11-43.

& High beam indicator
light

and have your vehicle inspected at a
SUBARU dealer as soon as possible.

& Cruise control set indicator

This indicator appears when vehicle
speed has been set to use the cruise
control function. Refer to “To set cruise
control” F7-48.

This light shows that the headlights are in
the high beam mode.
This indicator light also illuminates when
the headlight flasher is operated.

& Automatic headlight

& Cruise control indica-

& Headlight indicator
light

This indicator light illuminates under the
following conditions.
. when the light switch is turned to the
” or “ ” position
“
. when the light control switch is in the
“AUTO” position and the headlights illuminate automatically

& Driver’s control center differential auto indicator (STI)

This light illuminates when the automatic
headlight beam leveler does not operate
normally.
If this light illuminates while driving or does
not turn off approximately 3 seconds after
turning the ignition switch to the “ON”
position, have your vehicle inspected at
your SUBARU dealer.

tor

This indicator appears when the cruise
control main button is pressed to activate
the cruise control function. For details,
refer to “To set cruise control” F7-48.

CAUTION
If the CHECK ENGINE warning light/
malfunction indicator light illuminates, the cruise control indicator
flashes at the same time. At this
time, avoid driving at high speed

beam leveler warning
light (models with LED
headlights)

& Front fog light indicator
light (if equipped)

This indicator light illuminates while the
front fog lights are illuminated.

This indicator functions while the ignition
switch is “ON”. When it appears, it
indicates that the driver’s control center
differential is set to the auto mode. It
disappears when the driver’s control
center differential is set to the manual