Subaru WRX & WRX STI Manuals 2014 Impreza WRX & WRX STI Owner's Manual | Page 366

Maintenance and service/Replacing bulbs

& Backup light (5-door)

6. Put the rear combination light assembly into place while aligning the clip with
the guide on the vehicle.

1. Apply a flat-head screwdriver to the
light cover as shown in the illustration, and
pry the light cover off from the rear gate
trim.

11-45

2. Turn the bulb socket counterclockwise
and remove it.

3. Pull the bulb out of the bulb socket and
replace it with a new one.
4. Install the bulb socket by turning it
clockwise.
5. Install the light cover on the rear gate.

7. Tighten the upper and lower screws.

– CONTINUED –