Subaru WRX & WRX STI Manuals 2012 Impreza WRX & WRX STI Owner's Manual | Page 366

11-44

Maintenance and service

! 5-door models

1. Using a Phillips screwdriver, remove
the upper and lower screws that secure
the rear combination light assembly.

vehicle.

1)
2)

Rear side marker light
Rear turn signal light

6. Put the rear combination light assembly into place while aligning the clip with
the guide on the vehicle.

3. Remove the bulb socket from the rear
combination light assembly by turning it
counterclockwise.
4. Pull the bulb out of the bulb socket and
replace it with a new one.
5. Set the bulb socket into the rear
combination light assembly and turn it
clockwise until it locks.

7. Tighten the upper and lower screws.
2. Slide the rear combination light assembly rearward and remove it from the