Subaru WRX & WRX STI Manuals 2012 Impreza WRX & WRX STI Owner's Manual | Página 142
3-24
Instruments and controls
& Turn signal indicator
lights
These lights show the operation of the turn
signal or lane change signal.
If the indicator lights do not blink or blink
rapidly, the turn signal bulb may be burned
out. Replace the bulb as soon as possible.
Refer to “Replacing bulbs” F11-39.
& High beam indicator
light
This light shows that the headlights are in
the high beam mode.
This indicator light also illuminates when
the headlight flasher is operated.
& Cruise control indicator light
This light illuminates when the “CRUISE”
main switch is pressed to activate the
cruise control function.
NOTE
. If you press the “CRUISE” main
switch button while turning the ignition
switch “ON”, the cruise control function is deactivated and the cruise
control indicator light flashes. To reactivate the cruise control function,
turn the ignition switch back to the
“Acc” or “LOCK” position, and then
turn it again to the “ON” position.
. If this indicator light and the CHECK
ENGINE warning light/malfunction indicator light flash simultaneously during driving, have the vehicle checked
by your nearest SUBARU dealer.
& Driver’s control center differential auto indicator light
(STI)
& Cruise control set indicator light
This light illuminates when vehicle speed
has been set to use the cruise control
function.
& Front fog light indicator
light (if equipped)
This indicator light illuminates while the
front fog lights are illuminated.
& Headlight indicator
light
This indicator light illuminates when the
headlight switch is placed in the “
” or
“ ” position.
This light functions while the ignition
switch is “ON”. When illuminated, it
indicates that the driver’s control center
differential is set to the auto mode. It turns
off when the driver’s control center differential is set to the manual mode. For
details, refer to “Driver’s Control Center
Differential (DCCD) (STI)” F7-18.
! Driver’s control center differential auto [+] indicator
light
When the AUTO [+] mode is set, the
AUTO [+] indicator light illuminates.
For details, refer to “Driver’s Control
Center Differential (DCCD) (STI)” F7-18.