62
Child Restraint Systems
Store the removed head restraint in the trunk. Do not place the head restraint in the passenger compartment to prevent it from being thrown around in the passenger compartment in a sudden stop or a sharp turn.
4. Insert the tongue plate into the buckle until you hear a click.
2. If the child restraint system makes contact with the head restraint, perform the following procedure. – Except rear center seat: Remove the head restraint.
– Rear center seat: Raise the head restraint to the extended position. If the child restraint system still makes contact, remove the head restraint.
For details, refer to“ Head Restraint Adjustment” FP39.
CAUTION
WARNING
When you intend to install a child restraint system in the rear center seating position, if the child restraint system does not fit snugly against the contours of the rear center seat cushion, install the child restraint system in a window-side seating position to be safe.
3. Run the lap and shoulder belt through the child restraint system following the instructions provided by its manufacturer.
5. Take up the slack in the lap belt.
6. Pull out the seatbelt fully from the retractor to change the retractor over from the Emergency Locking Retractor( ELR) to the Automatic Locking Retractor( ALR) function. Then, allow the belt to rewind into the retractor. As the belt is rewinding, clicks will be heard which indicate the retractor functions as ALR.