Seat Heater 37 |
||||||
|
seatback. To remove:
Use a key or other hard, pointed object to press the remove button, then pull out the head restraint.
To install:
Push the head restraint into the holes on the top of the seatback until it locks.
Each head restraint should be adjusted so that the center of the head restraint is closest to the top of the occupant’ s ears.
NOTE
It is not possible to remove or install the head restraint without reclining the front seatback. Reclining the front seatback and then remove or install the head restraint.
|
! Head restraint angle adjustment s01aa0402 |
The angle of the head restraint can be adjusted in several steps. While maintaining a suitable driving posture, adjust the head restraint to a position where the back of your head is as close to the head restraint as possible.
To tilt:
Tilt the head restraint by hand to the preferred position. A click will be audible when the head restraint is locked.
To return:
Tilt the head restraint once as far forward as it can go. The head restraint will automatically return to the fully upright position. Then, adjust the head restraint again to the preferred angle.
|
1-2. Seat Heater( If Equipped)
s01ab
The seat heater operates when the ignition switch is in the“ ON” position.
CAUTION
. Do not put hard or heavy objects or ones with protrusions on the seat, and do not stab the seat with sharp objects, such as pins or needles.
. People with delicate skin may suffer slight burns even at low temperatures if they use the seat heater for a long period of time. When using the heater, always be sure to warn the persons concerned.
. Do not put anything on the seat which insulates against heat, such as a blanket, cushion, or similar items. This may cause the seat heater to overheat.
. When the seat is warmed enough or before you leave the vehicle, be sure to turn off the seat heater.
|
1
Seat, Seatbelt and SRS Airbags
|
||
– CONTINUED – |