Child Restraint Systems 67 |
|||||||||
|
Each lower anchorage is located behind the cover of seatback bottom .
CAUTION
When you install a child restraint system , follow the manufacturer ’ s instructions supplied with it . After installing the child restraint system , check to ensure that it is held securely in position . If it is not held tight and secure , the danger of your child suffering personal injury in the event of an accident may be increased .
|
system .
If it is hard to install the child restraint system because the anchorage cover returns to the original position , press the anchorage cover to the seat cushion until it is flat .
|
Adjustment ” FP37 . |
CAUTION
Store the removed head restraint in the trunk . Do not place the head restraint in the passenger compartment to prevent it from being thrown around in the passenger compartment in a sudden stop or a sharp turn .
|
1
Seat , Seatbelt and SRS Airbags
|
|||||
Peel off the anchorage cover completely from the selected side of the rear seatback to expose the anchorages ( bars ) to be used for installation of the child restraint |
3 . If the child restraint system makes contact with the head restraint of the rear seating position where the child restraint system is to be installed , perform the following procedure . – Except rear center seat : Remove the head restraint .
– Rear center seat : Raise the head restraint to the extended position . If the child restraint system still makes contact , remove the head restraint .
For details , refer to “ Head Restraint
|
4 . While following the instructions supplied by the child restraint system manufacturer , connect the lower hooks onto the lower anchorages located at “ ” marks on the bottom of the rear seatback . When the hooks are connected , make sure the adjacent seatbelts are not caught .
– CONTINUED –
|