406
Access Key Fob – If Access Key Fob Does Not Operate Properly
“ ACC ” . Under other conditions : “ ON ”
5 . When the keyless access with pushbutton start system is deactivated , press the push-button ignition switch with the brake pedal ( all models ) and the clutch pedal ( MT models ) released . The status of the push-button ignition switch then changes to “ ON ”.
NOTE
If the engine does not start even though the above procedure was followed precisely , contact your SUBARU dealer .
NOTE
If the power does not switch even though the above procedure was followed precisely , contact your SUBARU dealer .
& Starting Engine s09ap03
1 . Apply the parking brake .
2 . Shift the shift lever to neutral ( MT models ) or the select lever into the “ P ” position ( CVT models ).
3 . Depress the brake pedal ( all models ). 4 . Depress the clutch pedal ( MT models ).
5 . Hold the access key fob with the buttons facing you , and touch the push-button ignition switch with it . When the communication between the access key fob and the vehicle is completed , a chime ( ding ) will sound . At the same time , the push-button ignition switch turns to the “ ACC ” or “ ON ” position .
6 . After the push-button ignition switch turns to the “ ACC ” or “ ON ” position , while depressing the brake pedal ( all models ) and the clutch pedal ( MT models ), press the push-button ignition switch .