|
9-9 . Access Key Fob – If Access Key Fob Does Not Operate Properly
CAUTION
s09ap
Keep metallic objects , magnetic sources and signal transmitters away from the area between the access key fob and the push-button ignition switch . They may interfere with the communication between the access key fob and the pushbutton ignition switch .
The following functions may be inoperable because of strong radio signals in the surrounding area or a low battery condition of the access key fob .
. Locking / unlocking all the doors ( including the trunk lid )
. Switching the power status . Starting the engine
|
In such cases , perform the following procedure . When the battery of the access key fob is discharged , replace it with a new one . Refer to “ Replacing Battery of Access Key Fob ” FP461 . |
& Locking and Unlocking
1 Release button 2 Emergency key
s09ap01
|
While pressing the release button of the access key fob , take out the emergency key .
Lock or unlock the driver ’ s door with the emergency key in the procedure described in “ Locking and Unlocking from the Outside ” FP124 .
NOTE
After locking or unlocking , be sure to attach the emergency key back to the access key fob .
|
& Switching Power Status s09ap02
1 . Apply the parking brake .
2 . Shift the shift lever to neutral ( MT models ) or the select lever into the “ P ” position ( CVT models ).
3 . Depress the clutch pedal ( MT models ) or brake pedal ( CVT models ).
4 . Hold the access key fob with the buttons facing you , and touch the push-button ignition switch with it . When the communication between the access key fob and the vehicle is completed , a chime ( ding ) will sound . At the same time , the status of the push-button ignition switch changes to either of the following . . When the keyless access with pushbutton start system is deactivated :
|
In Case of Emergency
9
|
|||||
– CONTINUED – |