402
Towing
After towing , remove the towing hook from the vehicle and stow it in the under-floor storage compartment .
Fit the towing hook cover on the bumper .
WARNING
. Do not use the towing hook for purposes other than towing your vehicle .
. Be sure to remove the towing hook after towing . Leaving the towing hook mounted on the vehicle could interfere with proper operation of the fuel pump shut off function when the vehicle is struck from behind .
. To prevent deformation to the bumper and the towing hook , do not apply an excessive load to the towing hook .
. For models equipped with BSD ( Blind Spot Detection ) and RCTA ( Rear Cross Traffic Alert ) driving support systems , when towing another vehicle , touch “ Rear Vehicle Detection ( BSD / RCTA )” to deactivate the system . The system may not operate properly due to the blocked radar waves . For details about how to turn on / off the Rear Vehicle Detection ( BSD / RCTA ), refer to “ Car settings ” FP198 .
Front tie-down hooks :
Rear tie-down holes :
CAUTION
The front tie-down hooks are located between each of the front tires and the front bumper .
Front tie-down hooks are for tying down the vehicle . They are not for towing .
1 Rear tie-down hole
The rear tie-down holes are located near each of the jack-up reinforcements .
There is a plug in each rear tie-down hole . To use the rear tie-down holes , remove the