|
NOTE
If you make an error when performing any steps in the following procedure , place the ignition switch in the “ LOCK ”/ “ OFF ” position once and then start over again .
|
( 3 ) The Vehicle Dynamics Control OFF indicator light turns off . ( 4 ) The ABS warning light turns off . |
||||||||
|
! To deactivate s07au0201
1 . Park your vehicle in a flat and safe location and apply the parking brake .
2 . Turn the ignition switch to the “ LOCK ”/ “ OFF ” position .
3 . Restart the engine .
4 . Confirm the following items . ( 1 ) The Brake system warning light illuminates . ( 2 ) The Vehicle Dynamics Control warning light turns off .
|
Vehicle Dynamics Control OFF switch |
1 Vehicle Dynamics Control OFF indicator light
2 TRACK mode indicator light
5 . Press and hold the Vehicle Dynamics Control OFF switch for 30 seconds until the Vehicle Dynamics Control OFF indicator light “ ” and TRACK mode indicator light on the combination meter turn on and off .
6 . Within 5 seconds , release the Vehicle Dynamics Control OFF switch .
|
7
Starting and Operating
|
||||||
– CONTINUED – |