2-3. Driver settings
[ Delete driver ]
( 1) If equipped
Setting
Description
The selected user profile will be removed from the vehicle.
( 2) Refer to the vehicle " OWNER’ S MANUAL "( 3) Cannot be used with fleet vehicles such as rental cars.
Registering face identification Face identification enables the system to identify the driver.
1 Touch [ ] from the main menu. 2 Touch [ Personal info ] on the submenu. 3 Touch [ Setup face ]. 4 Carefully read the Terms of Service and touch [ Accept ].
5 Look directly at the driver monitor camera, ensure only your face is being displayed, and then touch [ Begin ].
2
Settings and registration
6 The system will start scanning your face.
● Once registration is complete, a message is displayed on the screen.
● If an error message appears, follow the on-screen instructions and try again.
Troubleshooting
If there is a problem with the user profile function, first check the table below.
Problem Likely cause Solution
Unable to load saved profile
System is not loading the previously saved profile.
Turn the Bluetooth ® setting on and ensure the device is paired with the system and set as primary device.
57