6-4 . Using the other interior features
471
WARNING
■ Conforming to federal safety standards
Do not use the HomeLink ® compatible transceiver with any garage door opener or device that
lacks safety stop and reverse features as required by federal safety standards .
This includes any garage door that cannot detect an interfering
object . A door or device without these features increases the risk of death or serious injury .
■ When operating or programming HomeLink ®
Never allow a child to operate or play with the HomeLink ® buttons .
Programming HomeLink ®
■ Before programming Home-
Link ®
• During programming , it is possible that garage doors , gates , or other devices may operate . For this reason , make sure that people and objects are clear of the garage door or other devices to prevent injury or other potential harm .
• It is recommended that a new battery be placed in the remote control transmitter for successful programming .
• Garage door opener motors manufactured after 1995 may be equipped with rolling code protection . If this is the case , you may need a stepladder or other sturdy , safe device to reach the “ Learn ” or “ Smart ” button on the garage door opener motor .
■ Programming HomeLink ®
Steps 2 through 4 must be performed within 60 seconds , otherwise the HomeLink ® indicator light will stop flashing and programming will not be successfully completed . 1 Vehicles with Digital inner
mirror : Press the HomeLink ® button or menu button
When the HomeLink ® button is pressed :
Homelink ® Training Tutorial will be displayed to assist you programming the HomeLink ® .
When Homelink ® Training Tutorial is displayed , follow the instructions
displayed .
When the menu button is pressed : Press the menu button and
select the “ Set Up >”. Homelink ® Training Tutorial will be displayed to assist you programming the Home-
Link ® .
When Homelink ® Training Tutorial is displayed , follow the instructions displayed .
2 Press and release the Home-
Link ® button you want to program and check that the
HomeLink ® indicator light flashes ( orange ).
3 Point the remote control transmitter for the device at
6
Interior features