5-4 . Using the driving support systems
405
Preparation before using Remote control function
■ Preparation before using
Make sure to perform the following before using Remote control function : 1 Download the Remote Park app from the app store .
2 Turn the power switch to ON and register the smartphone as a Bluetooth device to the multimedia system .
For details on registering a
Bluetooth device , refer to the “ MUL- TIMEDIA OWNER ’ S MANUAL ”.
3 Setup the Remote Park app and register the vehicle .
4 The registered vehicle will be displayed on the screen of the smartphone .
Select the vehicle .
The name and image of the vehicle can be changed on the new vehicle registration screen .
Vehicles can be added through the menu screen .
■ Remote control function on / off
1 Select and then select “ Advanced Park ” on the multimedia display .
2 Select “ Remote Park ” to turn it on / off . ( The default setting is on .)
3 Press the Advanced Park main switch .
If the switch is pressed while assistance is being performed , the assistance will be canceled .
4 Select displayed on the multimedia display .
NOTICE
■ Remote control function
●When using Remote control function , make sure carry an
electronic key in your pocket , etc .
●If an electronic key is held together with a smartphone ,
etc ., the electronic key may not be able to be detected .
●Vehicles with a digital key : Remote control function cannot
be used when carrying only a digital key . The driver should always carry the electronic key .
●When entering the vehicle after using Remote control function , make sure that the electronic key is brought into the vehicle
and all of the doors are closed .
Vehicles with a power easy access system : After entering the vehicle and ending Remote control function operation , the seat return function will operate when the driver ’ s seat seat belt is fastened or the brake pedal is depressed .
5
Driving