138 2-2 . Charging
■ Charging starts , even though charging schedule is registered Likely cause
“ Charge Now ” is set to on
Charging schedule is set to off
The charging mode is set to “ startstop ” and the AC charging connector is connected between the start and end times .
AC charging connector was removed and reinserted while charging indicator of the charging port was flashing
Correction procedure
When charging according to the charging schedule , set “ Charge Now ” to off . ( �P . 122 , 126 )
Check that charging schedule is not set to off . ( �P . 117 )
When the charging mode is “ startstop ”, if the AC charging connector is connected after the start time , charging will be carried out until the end time . Check the charging schedule .
If the AC charging connector is removed and reinserted while the charging indicator is flashing , the charging schedule is canceled . Temporarily remove the AC charging connector , and then reconnect it .