2-2 . Charging
137
Likely cause
The DC charging connector is still connected .
The DC charging system is malfunctioning
Correction procedure
For safety , the EV system can not be started when the DC charging connector is connected . ( �P . 100 )
Remove the DC charging connector immediately after the charging is completed .
• Depending on the type of malfunction , the EV system can be started after closing the DC charging port lid .
• If the EV system can not be started , contact your SUBARU dealer .
When charging schedule function does not operate normally
When charging schedule function does not operate normally Refer to the following table and carry out the appropriate correction procedure .
■ Cannot charge at desired time
2
Electric Vehicle system
Likely cause
The vehicle calendar and clock is not set correctly .
AC charging connector is not connected to vehicle
AC charging connector was connected after set time
Correction procedure
Check the calendar setting and set it to the correct date . ( �P . 158 )
Before using the charging schedule , connect the AC charging connector .
Connect the AC charging connector before the time set in “ Start ”.
When the charging mode is set to “ Start-Stop ”, the traction battery will charge even if the start time has passed , if the AC charging connector is connected before the stop time .