122 2-2 . Charging schedule ” procedure . ( �P . 120 )
Select “ Save ” and press save the settings .
• “ Delete ” to
Select the contents are desired to be changed , press and hold the
and then select “ Delete ”.
A deletion confirmation screen will be displayed .
Press or of the meter control switches to select “ Yes ”, and then press to delete the selected charging schedule .
To cancel deletion of the registered contents , select “ No ” and then
press .
■ Setting “ Charge Now ” to on
The “ Charge Now ” setting can be changed by performing one of the two following procedures .
� Operation on “ Charging Schedule ” screen
1 Display the “ Charging Schedule ” screen . ( �P . 119 )
2 Press or of the meter control switches to select “ Charge Now ”, and then
press .
Each time is pressed , “ Charge Now ” switches between on and off .
� Operation on “ Closing Display ” screen
1 Turn the power switch off . The “ Closing Display ”
screen * will be displayed on the multi-information display . ( If the door is opened while waiting for charging schedule , the same screen will be displayed .)
* : If “ Closing Display ” is not set to
“ Charging Schedule ” on the screen of the multi-information display , the “ Closing Display ” is not displayed . In this case , check the settings on the multi-information display .
2 Press to set “ Charge Now ” to on .
After setting operations are complete , charging starts when the AC charging connector is connected .
■ Displaying “ Next Event ” 1 Display the “ Charging Schedule ” screen . ( �P . 119 )
2 Press or of the meter control switches to select “ Next Event ”, and then press
.
The “ Next Event ” screen will be displayed .
■ When charging schedule setting operations are canceled
When the vehicle is in the following