2-3 . Driver settings
[ Delete driver ]
Setting
Registering face identification
Description
The selected user profile will be removed from the vehicle .
Face identification enables the system to identify the driver .
1 Touch [ ] from the main menu . 2 Touch [ Personal info ] on the submenu . 3 Touch [ Setup face ]. 4 Carefully read the Terms of Service and touch [ Accept ].
5 Look directly at the driver monitor camera , ensure only your face is being displayed , and then touch [ Begin ].
2
Settings and registration
6 The system will start scanning your face .
● Once registration is complete , a message is displayed on the screen .
● If an error message appears , follow the on-screen instructions and try again .
Troubleshooting
If there is a problem with the user profile function , first check the table below .
Problem Likely cause Solution
Unable to load saved profile
System is not loading the previously saved profile .
Turn the Bluetooth ® setting on and ensure the device is paired with the system and set as primary device .
* 1 : If equipped * 2 : Refer to the vehicle " OWNER ’ S MANUAL " * 3 : Cannot be used with fleet vehicles such as rental cars .
59