7-3 . Do-it-yourself maintenance
485
• Vehicle is driven on unpaved roads
• Vehicle is driven near other vehicles and system cannot recognize tire pressure warning valves and transmitters of your vehicle over those of other vehicles
• Wheel with tire pressure warning valve and transmitter installed is
inside or near the vehicle
●If the vehicle is reversed during registration , all data collected until then will be cleared . Perform driving again .
●If registration does not complete after driving for 1 hour or more ,
perform the ID code registration procedure again from the beginning .
●If the tire pressure warning light does not blink 3 times when starting ID code registration procedure , the procedure may not have started . Perform the procedure
again from the beginning .
●If ID codes cannot be registered
even when performing the above procedure , contact your SUBARU dealer .
Canceling ID code registration
To cancel ID code registration after it has been started , select “ Register New Valve / ID ” again on the multi-information display .
If ID code registration has been canceled , the tire pressure warning light will turn off .
If the warning light does not turn off , ID code registration may not have been cancelled correctly . To cancel registration , select “ Register New Valve / ID ” again on the multi-information display .
Selecting wheel set
Your vehicle is equipped with a tire pressure warning system with a function to register two sets of ID codes . This allows for registration of a second wheel set , for example a winter set .
• The wheel set can be changed only if a second wheel set has been registered to the system . If a second wheel set has not been registered , message will be displayed and it will not be possible to change to the selected wheel set . ID codes can be registered by yourself .
• Only a change between both registered wheel set is possible , mixing between these wheel sets is not supported .
• While registering ID codes , it may not be possible to change between wheel sets normally . Cancel registration before changing between wheel sets .
■ How to change between wheel sets
1 Install the desired wheel set .
2 Start the EV system . ( �P . 231 )
The ID code selecting procedure cannot be performed while the vehicle is moving .
7
Maintenance and care