212 4-6 . Favorite settings tinuously for approximately 3 seconds .
■ Recall procedure
Make sure that the doors are locked before recalling the driving position . Carry the electronic key that has been registered to the driving position , and then unlock and open the driver ’ s door using the smart key system or wireless remote control .
The driving position will move to the recorded position . If the driving position is in a position that has already been recorded , the seat will not move .
■ Cancelation procedure
Carry only the key you want to cancel and then close the driver ’ s door . If 2 or more keys are in the vehicle , the driving position cannot be canceled properly . 1 Check that the shift position is in P .
2 Turn the power switch to ON .
3 While pressing the “ SET ” button , press and hold the door lock switch ( either lock or unlock ) until the buzzer sounds twice .
If the driving position could not be canceled , the buzzer sounds continuously for approximately 3 seconds .
■ Recalling the driving position using the memory recall function
●Different driving positions can be registered for each electronic key . Therefore , the driving position that is recalled may be different
depending on the key being carried .
●If a door other than the driver ’ s door is unlocked with smart key system , the driving position cannot be recalled . In this case , press the driving position button which has been set .
■ Customization
Settings ( e . g . the unlock door settings of the memory recall function )
can be customized . ( Customizable features : �P . 575 )