4-6 . Favorite settings
211
●Driving position recall ( only when the shift position is in P )
For details , refer to the “ MULTIME- DIA OWNER ’ S MANUAL ”.
■ Seat positions that can be memorized ( �P . 186 )
The adjusted positions other than the position adjusted by lumbar support switch can be recorded .
■ Operating the driving position memory after turning the power switch to OFF
Recorded seat positions can be activated up to 180 seconds after
the driver ’ s door is opened and another 60 seconds after it is closed again .
■ In order to correctly use the
driving position memory function
If a seat position is already in the furthest possible position and the seat is operated in the same direction , the recorded position may be slightly different when it is recalled .
■ When recalling the driving position
Take care so that a head restraint does not contact the ceiling or a sun
visor .
■ If the 12-volt battery is disconnected
The memorized positions are erased .
■ When the recorded seat position cannot be recalled
The seat position may not be recalled in some situations when the
seat position is recorded in a certain range . For details , contact your SUBARU dealer .
■ Jam protection function
While the driving position is recalled or the power easy access system is operating , if an object is stuck behind the front seat , the front seat
will stop and then slightly move forward . When the jam protection function operates , the seat stops at a position other than the set seat position . Check the seat position .
WARNING
■ Seat adjustment caution
Take care during seat adjustment so that the seat does not strike the rear passenger or squeeze
your body against the steering wheel .
Registering / recall / canceling a driving position to an electronic key ( memory recall function )
■ Registering procedure
Record your driving position to button “ 1 ” or “ 2 ” before performing the following :
Carry only the key you want to register , and then close the driver ’ s door . If 2 or more keys are in the vehicle , the driving position cannot be recorded properly . 1 Check that the shift position is in P .
2 Turn the power switch to ON .
3 Recall the driving position that you want to record .
4 While pressing the recalled button , press and hold the door lock switch ( either lock or unlock ) until the buzzer sounds .
If the driving position could not be registered , the buzzer sounds con-
4
Before driving