116 2-2 . Charging
■ If the DC charging connector cannot be unlocked
�P . 93
■ After DC charging
Even if the traction battery is charged to the upper limit value that is set , the level of charge displayed on the DC charger may be lower
than the actual one .
NOTICE
■ Caution after DC charging
●Be sure to attach the DC charging inlet cap to the DC
charging inlet and then close the charging port lid after removing the DC charging connector from the inlet . If the DC charging inlet cap is not closed , foreign materials may get into the inlet and the EV system may be malfunctioning .
Using the charging schedule function
AC charging can be carried out at the desired time by registering the charging schedule .
■ Calendar settings Charging schedule is performed according to the date and time shown on the multi-information display . Refer to the “ Settings display ” ( �P . 156 )
If the calendar settings check screen is displayed when an attempt was made to register a
charge schedule , check that the correct date is set . If it is incorrect , be sure to correct it .
If the calendar information is wrong , the charging schedule function will not operate normally .
Settings of the charging schedule function
When registering the charging schedule , the following settings can be changed .
■ Select the charging mode
One of the two following charging modes can be selected .
� “ Start ”
Starts charging at the set time * and finishes charging when fully charged .
� “ Start-Stop ” AC charging is performed