2-2 . Charging
115
WARNING
■ When connecting the DC charging connector
●Follow the handling procedures
of the DC charger to connect the DC charging connector . If the connector is not connected
properly , the system cannot recognize the connection , and it may be possible to start the EV
system .
After charging is completed , make sure to remove the DC charging connector from the DC charging inlet before starting the EV system .
If the vehicle is started off with the connector still connected , it could lead to an accident , possibly resulting in death or serious injury .
●Do not remove the DC charging connector from the DC charging inlet during DC charging . After operating the DC charger to stop charging , remove the DC charging connector from the DC charging inlet .
2 Remove the DC charging connector .
The DC charging connector shape and treatment will differ depending on the type of DC charger . Perform the operations in accordance to handling procedures of the DC
charger .
Return the removed DC charging connector to its original position .
3 Close the AC charging inlet cap and close the DC charging inlet cap , and then close the charging port lid .
2
Electric Vehicle system
NOTICE
■ When using DC charging
Make sure to follow the handling procedures of the DC charger . If the procedures are not followed properly , the vehicle and the DC
charger may be damaged .
After charging
1 Operate the DC charger to stop the charging .
DC charging connector will be unlocked automatically when
charging is completed .
■ When DC charging cannot be stopped
If charging cannot be stopped from the DC charger side due to a malfunction , etc .
You can also stop DC charging by pressing the door unlock button ( on
the electronic key , or driver ’ s door ) three times at 1 to 2 seconds intervals .