102 2-2 . Charging
● Avoid frequent DC charging Also , if the capacity of the traction battery capacity reduces , the distance that can be driven decreases . However , vehicle performance does not significantly become worse .
■ When the remaining charge of the traction battery is low after
charging
In the following situations , the remaining charge of the traction battery after charging completes may be less than normal in order to protect the traction battery ( the driving range after the battery is fully
charged may be shorter ). *
●Charging is performed when the outside temperature is low or high
● Charging is performed immediately after high-load driving or in extreme heat
In any other situation , if the remaining charge of the traction battery is significantly lower than normal after charging completes , have the vehicle inspected by your SUBARU dealer . * : When this occurs , even if the
remaining charge display of the traction battery shows that it is fully charged , the remaining charge rapidly decreases faster than normal .
■ When the charging amount sent to the traction battery decreases
When the amount of power supplied by the charger is low or operation of the battery heater , etc ., reduces the charging power sent to the traction battery , the charging amount sent to the traction battery may decrease .
■ Certification
This device complies with Part 15 of
the FCC Rules . Operation is subject to the following two conditions :
( 1 ) this device may not cause harmful interference , and ( 2 ) this device must accept any interference received , including interference that may cause undesired operation .
■ Charging time may increase In the following situations , charging time may become longer than normal :
●In very hot or very cold temperatures .
●When the traction battery becomes hot , such as immediately after high-load driving .
●The vehicle is consuming a lot of
electricity , for example , when the headlights are on , etc .
●When using “ My Room Mode ”. ( �P . 127 )
●There is a power outage during charging .
●There is an interruption in the electrical supply .
●There is a drop in the voltage of external power source .
●The charge in the 12-volt battery is low , for example due to the vehicle being left unused for a long period of time .
●When the upper limit of charging
current is changed in the charging current setting of the vehicle ( �P . 106 )
●When the battery heater operates . ( �P . 97 )
●When the “ Battery Cooler ” is operated before charging . ( �P . 97 )
●When the plug generates heat due to a loose outlet connection , etc .
●When adjusting the power supply with the charger .
●When frequently and repeatedly using DC charging .
●When selecting “ DC charging power ” setting other than “ MAX ”.
●When the temperature of