80
SEAT, SEATBELT AND SRS AIRBAGS
Using lower and tether anchors s01ag0704
WARNING
Before installing a child restraint system, be sure to confirm that the seatback is securely locked into place. Otherwise, in an accident, serious injury or death could result.
1. Move the seatback back and forth to confirm that it is securely locked into place. For details, refer to“ Folding Down the Rear Seatback” FP47.
2. You will find“” marks at the bottoms of the rear seatback. These marks indicate the positions of the lower anchors. Each lower anchor is located behind the cover of seatback bottom.
Except for Canada-spec. models
CAUTION
When you install a child restraint system, follow the manufacturer’ s instructions supplied with it. After installing the child restraint system, check to ensure that it is held securely in position. If it is not held tight and secure, the danger of your child suffering personal injury in the event of an accident may be increased.
Peel off the lower anchor cover completely from the selected side of the rear seatback to expose the lower anchors to be used for installation of the child restraint system.
If it is hard to install the child restraint system because the lower anchor cover returns to the original position, press the lower anchor cover to the seat cushion until it is flat.
S _ 103310-W
Canada-spec. models
S _ 103311-W
S _ 103371-W