SEAT, SEATBELT AND SRS AIRBAGS 63
2. Insert a tongue plate or other hard pointed object into the slot in the anchor buckle on the right-hand side and push it in. The anchor tongue plate will then disconnect from the buckle.
CAUTION
1
S _ 103295-W
3. With the belt held by hand, allow the retractor to roll up the belt slowly. You should hold the webbing end and guide it back into the retractor while it is rolling up. Neatly store the tongue plate in the recess on the ceiling and then insert the anchor tongue plate into the slot located at the front of the recess.
S _ 103080-W
Observe the following precautions.
Otherwise, the tongue plate can hit against the trim, causing damage to the trim.
. Do not allow the retractor to roll up the seatbelt too quickly.
. Have the seatbelt fully rolled up so that the tongue plates are neatly stored.
SEATBELT MAINTENANCE s01ae07
To clean the seatbelts, use a mild soap and lukewarm water. Never bleach or dye the belts because this could seriously affect their strength.
Inspect the seatbelts and attachments including the webbing and all hardware periodically for cracks, cuts, gashes, tears, damage, loose bolts or worn areas. Replace the seatbelts even if only minor damage is found.
S _ 103079-W
CAUTION
. Keep the belts free of polishes, oils, chemicals and particularly battery acid.
. Never attempt to make modifications or changes that will prevent the seatbelt from operating properly.