62
SEAT, SEATBELT AND SRS AIRBAGS
4. After confirming that the webbing is not twisted, insert the anchor tongue plate attached at the webbing end into the buckle on the right-hand side until a click sounds.
6. To tighten the lap part, pull up on the shoulder belt.
S _ 103074-W
. If the belt stops before reaching the buckle, return the belt slightly and pull it out more slowly.
. If the belt still cannot be unlocked, give it a strong pull and let it retract slightly, then pull it out slowly again.
5. Insert the center seatbelt tongue plate into the center seatbelt buckle marked“ CENTER” on the left-hand side until it clicks.
S _ 103076-W
7. Place the lap belt as low as possible on the hips, not on the waist.
Unfastening the seatbelt s01ae0614
1. Push the release button of the center seatbelt buckle( on the left-hand side) to unfasten the seatbelt.
Button
S _ 103221-W
S _ 103075-W
NOTE
When the seatback is folded down, it is necessary to disconnect the connector.