SEAT, SEATBELT AND SRS AIRBAGS 41
Thigh extension( if equipped) s01aa0210
CAUTION
When the thigh extension is pulled out to its fullest, do not put weight on the top of it. Doing so could break the part.
. When retrieving a registered seat position, make sure the hands, feet and possessions of rear seat passengers are clear of the seat adjusting mechanism.
. When any unusual conditions or malfunctions occur during the retrieval of the seat position, stop the retrieval of the seat position by performing any of the following.
– Operate any of the power seat switches.
– Press the“ SET” button. – Press button“ 1” or“ 2”.
– Operate the outside mirror control switch.
1
S _ 103372-W
The seat front length can be adjusted.
Pull up the lever to adjust the length and release the lever to lock it.
DRIVER’ S SEAT MEMORY FUNCTION( If Equipped) s01aa03
WARNING
. To avoid loss of vehicle control or personal injury, never perform the following operations while driving.
– Adjusting the seat – Retrieving the seat position
. Before adjusting the seat, make sure that cargo or the hands and feet of rear seat passengers are clear of the adjusting mechanism.
. Perform the seat position retrieval before driving. Be sure to confirm that the select lever is in the“ P” position, and the parking brake is applied, when adjusting the seat position. Do not drive until the retrieval of the seat position is complete.
Some seat positions can be registered. Register the seat position with button“ 1” or“ 2” or each of the key fobs and retrieve the seat position.
The following seat positions can be registered.
. Forward / backward position of the seat. Angle of the seatback. Angle of the seat cushion. Height of the seat. Angle of the outside mirrors
. Angle of the outside mirrors while the vehicle is in reverse
NOTE
The seat position can also be retrieved with the Distraction Mitigation System user information. To do so, perform user registration in the Distraction Mitigation System settings. Refer to“ Using the Distraction Mitigation System” FP398.
Registration of memory position with button“ 1” or“ 2” s01aa0301
1. Adjust the seat position under the following conditions.
. The parking brake is applied.
– CONTINUED –