402
STARTING AND OPERATING
angle are in motion at the time when user recognition is completed, then it is not possible to retrieve the seat position, outside mirror angle, or reverse tilt-down outside mirror angle( models with driver’ s seat memory function).
. If any of the following operations is performed while retrieving of the seat position or outside mirror angle, retrieving of the seat position and outside mirror angle is canceled( models with driver’ s seat memory function).
– The power seat adjustment switch
was operated. – The outside mirror adjustment
switch was operated. – The“ SET” button was pressed. – The“ 1” or“ 2” button was pressed. – The select lever was moved to a
position other than“ P” position.
. User recognition may not be possible when there is dirt or fingerprints on the user recognition camera. To clean, either wipe using a soft cloth or else wipe gently using a moistened cloth that has been thoroughly wrung out.
DISTRACTION MITIGATION SYSTEM ON / OFF SETTINGS s07bp07
NOTE
. When the Distraction Mitigation System is turned OFF after user recognition was completed, the user recognition function stores the Distraction Mitigation System ON / OFF state.
. Even when the Distraction Mitigation System is set to OFF, the Distraction Mitigation System automatically turns ON once the driver’ s door is opened and closed while the vehicle is stopped. When the driver gets in the vehicle, a message will appear on the instrument cluster display.
. After the Distraction Mitigation System was turned OFF, if the Distraction Mitigation System is turned ON while the driver’ s door is open, user recognition may not occur correctly.
To turn on / off the Distraction Mitigation System s07bp0701
To turn the Distraction Mitigation System on and off, operate the center information display. Refer to“ Vehicle” FP206. When the Distraction Mitigation System is turned OFF, the Distraction Mitigation System OFF indicator on the instrument cluster display will illuminate.
NOTE
Even when the Distraction Mitigation System is turned off, the user recognition does not switch on or off automatically.
User recognition settings s07bp0702
The Distraction Mitigation System User recognition function can be turned ON / OFF. For the setting procedure, refer to“ Vehicle” FP206.
NOTE
. The user recognition function setting cannot be changed for each individual user.
. The default setting for the user recognition function is ON.
. When the user recognition function is turned OFF, the following items cannot be selected.
– Change User – Seat and Mirror Position( models
with driver’ s seat memory function)
Automatically retract seat on entry( models with driver’ s seat memory function) s07bp0704
The automatically retract seat on entry which automatically slides back the driver’ s seat when the driver’ s door is unlocked and opened.
This function can be turned ON / OFF. For the setting procedure, refer to“ Vehicle” FP206.