Child Restraint Systems 77 |
||||||||
For U. S.-spec. models |
Each lower anchorage is located behind the cover of seatback bottom.
CAUTION
When you install a child restraint system, follow the manufacturer’ s instructions supplied with it. After installing the child restraint system, check to ensure that it is held securely in position. If it is not held tight and secure, the danger of your child suffering personal injury in the event of an accident may be increased.
|
system.
If it is hard to install the child restraint system because the anchorage cover returns to the original position, press the anchorage cover to the seat cushion until it is flat.
|
1
Seat, Seatbelt and SRS Airbags
|
|||||
|
Other models
2. You will find“” marks at the bottoms of the rear seatback. These marks indicate the positions of the lower anchorages( bars).
|
Peel off the anchorage cover completely from the selected side of the rear seatback to expose the anchorages( bars) to be used for installation of the child restraint |
3. If the child restraint system makes contact with the head restraint of the rear seating position where the child restraint system is to be installed, raise the head restraint to the extended position. If the child restraint system still makes contact, remove the head restraint. For details, refer to“ Head Restraint Adjustment” FP46. |
||||||
– CONTINUED – |