560
Replacing Bulbs
5. Install the bulb socket by turning it clockwise.
6. Reconnect the electrical connector. 7. Reinstall the trunk trim lining.
! Outback / Subaru Outback Wilderness s11be0602
2. Remove the trunk trim lining by removing the clips indicated in the illustration.
2. Turn the bulb socket counterclockwise and remove it.
1. Apply a flat-head screwdriver to the light cover or rear gate light( if equipped) as shown in the illustration, and pry the light cover off from the rear gate trim.
3. Turn the bulb socket counterclockwise and remove it.
4. Pull the bulb out of the bulb socket and replace it with a new one.
3. Pull the bulb out of the bulb socket and replace it with a new one.
4. Install the bulb socket by turning it clockwise.