pinched could result in injury. |
the illustration. |
|||||||
1. Pull out the integrated crossbars from the roof rail holders by pulling up the covers. |
3. Install the bars into the holders.
4. Make sure that the latches are fitted securely.
! How to change the position of the crossbar s08aj080201
WARNING
Carefully read the warning label attached to the roof rail.
|
2. Remove the plastic plug of the roof rail holder by using the torque wrench. |
8
Driving Tips
|
|||||
2. Slide the bars in the direction shown in |
You can change the position of the rear crossbar. To change the position, perform the following procedure.
1. Take out the torque wrench from the under-floor storage compartment.
|
3. Remove the bolt of the crossbar by using the torque wrench and pull this side out. |
||||||
– CONTINUED – |