Wiper and Washer 275 |
||||||
|
NOTE
The windshield washer fluid warning light appears when the washer fluid level in the tank has dropped to the lower limit. If the warning light appears, refill the tank with fluid. For the tank refilling method, refer to“ Windshield Washer Fluid” FP547.
|
& Rear Window Wiper and Washer Switch( Outback / Subaru Outback Wilderness)
s03am02
|
: Washer( accompanied by wiper operation)
: Continuous: Intermittent: Off
: Washer( accompanied by wiper operation)
|
the rear wiper will operate intermittently at intervals corresponding to the vehicle speed. In this position, when you move the select lever to the“ R” position, the rear wiper will switch to continuous operation. When you move the select lever from the“ R”( reverse) position to another position, the rear wiper will return to intermittent operation.
Reverse gear interlocked rear wiper:
Even if the rear wiper switch is in the off“” position, if the front windshield wiper is operating continuously, the rear wiper will operate intermittently when you move the select lever to the“ R”( reverse) position.
The factory setting( default setting) of the reverse gear interlocked rear wiper is as follows.
. U. S.-spec. models: Non-operational. Other models: Operational
|
This setting can be changed by a SUBARU dealer. Consult your SUBARU dealer for details. |
3
Instruments and Controls
|
|
|
! Rear wiper s03am0201
To turn the rear wiper on, turn the knob switch upward.
To turn the wiper off, return the knob switch to the“” position.
With the switch turned to the“” position,
|
CAUTION
Do not attach anything that disturbs the rear wiper operation on the rear gate. Doing so may damage the rear wiper when it operates.
– CONTINUED –
|