262
Light Control Switch
Models without“ keyless access with push-button start system”:
The light control switch operates when the key is inserted in the ignition switch.
Regardless of the position of the light control switch, the illuminated lights are turned off when the key is removed from the ignition switch.
NOTE
The light control switch can be operated( except auto on / off headlights) even when under the following conditions.
. When the push-button ignition switch is turned to the“ OFF” position( models with“ keyless access with push-button start system”)
. When the key is not inserted into the ignition switch( models without“ keyless access with push-button start system”)
If the driver’ s door is opened while the headlights are illuminated under such conditions, a chirp sound will inform the driver that the lights are illuminated.
& Headlights
Except for Canada models s03ah01
For Canada models
To turn on the headlights, turn the knob on the end of the light control switch.
“” position( except for Canada models):
The headlights are all off.
Only when the following conditions are fulfilled, instrument panel illumination, headlights, parking lights, front side marker lights, rear side marker lights, tail lights and license plate lights are automatically on or off depending on the level of the ambient light.
. The engine is running.. The parking brake is fully released.
. The select lever is in a position other than the“ P” position.
“ OFF” position( for Canada models): The headlights are all off.* 1 * 2 * 1: When the light switch is switched to the“ OFF” position while the vehicle is stopped, the lights turn off. Then the light switch will automatically return to the“ AUTO” position.
* 2: The headlights will automatically change to the AUTO mode when the following conditions are met:
. The engine is running.
. The parking brake is fully released.
. The select lever is in a position other than the“ P” position.
“” position: Instrument panel illumination, headlights,