210
Combination Meter Display( Color LCD)
! ECO gauge s03bn1201
The ECO gauge shows the difference between the average rate of fuel consumption since the trip meter was last reset and the current rate of fuel consumption.
The ECO gauge indicates the current fuel |
efficiency as shown in the following chart. |
Displayed unit |
Needle position
“+” side
“ −” side
|
MPG |
Better |
Poorer |
l / 100km |
Poorer |
Better |
NOTE
. The ECO gauge shows only an approximate indication.
. After resetting the trip meter, the average rate of fuel consumption is not shown until driving 0.6 miles( 1 km). Until that time, the ECO gauge does not operate.
! Clock and outside temperature s03bn1202
This screen displays the clock and outside temperature.
NOTE
. The clock can be displayed in either 12-hour display or 24-hour display. For details, refer to“ General settings” FP227( 11.6- inch display models) or“ General settings”
FP245( dual 7.0-inch display models).
. The outside temperature indicator shows the temperature in the area around the sensor. However, the temperature may not be indicated correctly or the update may be delayed in the following conditions. – While parking or driving at low speeds
– When the outside temperature changes suddenly( example: when going in and out of an underground parking area or when passing through a tunnel)
– When starting the engine after being parked for a certain period of time
. You can set the temperature units to be displayed in Celsius( 8C) or Fahrenheit( 8F). For details, refer to“ Car settings” FP232( 11.6-inch display models) or“ Car Settings icon” FP251( dual 7.0-inch display models).