Combination Meter Display( Color LCD) 209 |
|||||||
|
the warning screen again. To recall the message marked with on the display, press the switch on the steering wheel.
& Welcome Screen( Opening Animation) and Good-Bye( Ending Animation) Screen
s03bn08
Welcome screen and Good-bye screen are motion graphic displayed on the combination meter display and center information display upon entering and exiting the vehicle.
When the driver’ s door is opened and closed after unlocking the door, the welcome screen( opening animation) will appear on the combination meter display( color LCD) for approximately 20 seconds.
When the ignition switch is turned to the“ LOCK”/“ OFF” position, the combination meter display( color LCD) gradually turns off by showing good-bye screen( ending animation).
NOTE
. The welcome screen and the goodbye screen may differ in the actual words and appearance.
. The basic screen will be shown when the ignition switch is turned to the“ ON” position while the welcome screen is displayed.
|
. Once the welcome screen appears, it takes a certain period of time to display it again.
. If the ignition switch is operated after unlocking the driver’ s door, the welcome screen will not appear even when the driver’ s door is opened and closed.
. The welcome screen will disappear when you lock the driver’ s door by using the remote keyless entry system( all models) or the keyless access function( if equipped) while the welcome screen is displayed.
. The welcome screen including the audio / navigation unit can be set to on or off.
. The welcome screen can be set to on or off. For details, refer to“ General settings” FP227( 11.6-inch display models) or“ General settings” FP245( dual 7.0-inch display models).
. The good-bye screen can be set to on or off. For details, refer to“ General settings” FP227( 11.6-inch display models) or“ General settings” FP245( dual 7.0-inch display models).
|
& Warning Screen
s03bn05
|
Example of warning
If there is a warning message or a maintenance notification, it will appear on combination meter display( color LCD). Take the appropriate actions based on the messages indicated.
& Meter Information Screen s03bn12
The meter information screen can be changed. For details, refer to“ General settings” FP227( 11.6-inch display models) or“ General settings” FP245( dual 7.0-inch display models).
|
3
Instruments and Controls
|
|||
– CONTINUED – |