180
Meters and Gauges
& Double Trip Meter |
s03ad05 |
To reset the trip meter, select either the A trip or B trip meter, then press and hold the TRIP RESET switch. |
& Fuel Gauge |
s03ad07 |
|
|
CAUTION |
|
|
|
|
To ensure safety, do not attempt to change the function of the indicator during driving, as an accident could result. |
|
|
1 TRIP RESET switch 2 Trip meter
This meter displays the two trip meters when the ignition switch is in the“ ON” position.
The trip meter shows the distance that the vehicle has been driven since you last set it to zero.
The display can be switched as shown in the following sequence by pressing the TRIP RESET switch.
NOTE
. If the connection between the combination meter and battery is broken for any reason such as vehicle maintenance or fuse replacement, the data recorded on the trip meter will be lost.
. If you press the TRIP RESET switch when the ignition switch is in the“ LOCK”/“ OFF” or“ ACC” position, the odometer / trip meter will light up. It is possible to switch between the A trip meter and B trip meter indications while the odometer / trip meter is lit up. In addition, it is possible to reset the trip meter by pressing and holding the TRIP RESET switch. The indicators will turn off when the TRIP RESET switch is not operated for approximately 10 seconds.
The fuel gauge shows the approximate amount of fuel remaining in the tank.
When the ignition switch is in the“ LOCK”/“ OFF” or“ ACC” position, the fuel gauge shows“ E” even if the fuel tank contains fuel.
The gauge may move slightly due to fuel level movement in the tank( e. g., during braking, turning or acceleration).
NOTE
. You will see the“” sign in the fuel gauge. This indicates that the fuel filler lid is located on the right side of the vehicle.
. If you press the TRIP RESET switch while the ignition switch is in the