Remote Keyless Entry System 139 |
|||||||||||
setting can also be changed by a SUBARU dealer. Consult your SUBARU dealer for details. |
& Locking the Doors s02ae01
Press the“” button to lock all doors, rear gate( Outback / Subaru Outback Wilderness) and fuel filler lid. An electronic chirp will sound once and the hazard warning flashers will flash once.
If any of the doors( or the rear gate) are not fully closed, the following will occur to alert you that the doors( or the rear gate) are not properly closed.
. An electronic chirp sounds five times.
. The hazard warning flashers flash five times.
When you close the door, it will automatically lock and then the following will occur.
. An electronic chirp sounds once.
. The hazard warning flashers flash once.
|
& Unlocking the Doors s02ae02
Press the“” button to unlock the driver’ s door and fuel filler lid. An electronic chirp will sound twice and the hazard warning flashers will flash twice. To unlock all doors and the rear gate, briefly press the“” button again within 5 seconds.
|
NOTE
If the interval between the first and second presses of the“” button( for unlocking of all of the doors and the rear gate) is extremely short, the system may not respond.
& Opening the Trunk Lid( Legacy) s02ae13
Press and hold the“” button to open the trunk lid. An electronic chirp will sound twice and the hazard warning flashers will flash twice.
This operation setting can be changed by a SUBARU dealer. Consult your SUBARU dealer for details.
& Unlocking the Rear Gate( Outback / Subaru Outback Wilderness) s02ae03
Press the“” button to unlock the rear gate. An electronic chirp will sound twice and the hazard warning flashers will flash twice.
This operation setting can be changed by a SUBARU dealer. Consult your SUBARU dealer for details.
|
& Setting Audible Signal Operation s02ae07
Using an electronic chirp, the system will give you an audible signal when the doors lock and unlock.
Models with“ keyless access with push-button start system”:
If desired, you can turn the audible signal off by operating the center information display. For details, refer to“ Car settings” FP232( 11.6-inch display models) or“ Car Settings icon” FP251( dual 7.0-inch display models). Furthermore, the volume setting of the audible signal can also be changed by a SUBARU dealer. Consult your SUBARU dealer for details.
Models without“ keyless access with push-button start system”:
Perform the following steps to deactivate the audible signal. Take the same steps to restore the function.
|
2
Keys and Doors
|
||||||
– CONTINUED – |