138
Remote Keyless Entry System
Access key fob 1 Lock / arm button 2 Unlock / disarm button
3 Trunk lid opener( Legacy)/ Rear gate unlock button( Outback / Subaru Outback Wilderness)
4 PANIC button
Transmitter 1 Lock / arm button 2 Unlock / disarm button
3 Trunk lid opener( Legacy)/ Rear gate unlock button( Outback / Subaru Outback Wilderness)
4 PANIC button
The remote keyless entry system has the |
following functions. |
. |
Locking and unlocking the doors, rear |
gate |
( Outback / Subaru |
Outback |
Wilderness) and fuel filler lid |
. |
Opening the trunk lid( Legacy) |
. |
Sounding a panic alarm |
. |
Arming and disarming the alarm system |
. For details, refer to“ Alarm System |
” FP146. |
The operable distance of the remote keyless entry system is approximately 30 feet
( 10 meters). However, this distance will vary depending on environmental conditions. The system’ s operable distance will be shorter in areas near a facility or electronic equipment emitting strong radio waves such as a power plant, broadcast station, TV tower, or remote controller of home electronic appliances.
NOTE
. For models with“ keyless access with push-button start system”, the remote keyless entry system will not be activated when the push-button ignition switch is in any position other than the“ OFF” position.
. For models without“ keyless access with push-button start system”, the remote keyless entry system will not be activated when the key is inserted in the ignition switch.
. The hazard warning flashers will flash once or twice when the access key fob / transmitter button is pressed in the following cases. – When locking the doors – When unlocking the doors – When unlocking the rear gate
If desired, you can turn the hazard warning flashers off by operating the center information display. For details, refer to“ Car settings” FP232. The