126
Keyless Access with Push-Button Start System
– An electronic chirp sounds five times.
– The hazard warning flashers flash five times.
. It is possible to lock the doors even when one of the doors is open. After performing the locking procedure, close the opened door or rear gate to lock it.
. Within 3 seconds after locking the doors and the rear gate using the keyless access function, it is not possible to unlock doors and / or the rear gate using the keyless access function.
. When locking, be sure to carry the access key fob to prevent locking the access key fob in the vehicle.
. The setting of the hazard warning flasher operation can be changed by operating the center information display. For details, refer to“ Car settings” FP232. Also, the setting of the hazard warning flasher operation can be changed by your SUBARU dealer. Contact your SUBARU dealer for details.
! Locking with the door lock sensor s02ap010801
1 Door lock sensor
Carry the access key fob, close all doors( for Outback / Subaru Outback Wilderness, including the rear gate) and touch the door lock sensor on the door handle. All doors including the rear gate and the fuel filler lid will be locked. Also, an electronic chirp will sound once and the hazard warning flashers will flash once.
NOTE
After touching the door lock sensor to lock all of the doors( including the rear gate), if you touch the door lock sensor once more to attempt the lock operation without first unlocking the doors, nothing will happen, even if the door lock sensor is touched. In this case,
perform the unlocking operation once first. You can then touch the door lock sensor to lock the doors.
! Locking with the rear lock button( Outback / Subaru Outback Wilderness) s02ap010802
1 Rear lock button
Carry the access key fob, close all doors including the rear gate and press the rear lock button. The rear gate, the fuel filler lid and all doors will be locked. Also, an electronic chirp will sound once and the hazard warning flashers will flash once.