2 . Remove the trunk trim lining by removing the clips indicated in the illustration . |
1 . Apply a flat-head screwdriver to the light cover or rear gate light ( if equipped ) as shown in the illustration , and pry the light cover off from the rear gate trim . |
2 . Turn the bulb socket counterclockwise and remove it . |
Maintenance and Service
11
|
||
|
3 . Turn the bulb socket counterclockwise and remove it .
4 . Pull the bulb out of the bulb socket and replace it with a new one .
|
3 . Pull the bulb out of the bulb socket and replace it with a new one .
4 . Install the bulb socket by turning it clockwise .
|
||||
– CONTINUED – |