pinched could result in injury . |
the illustration . |
|||||||
1 . Pull out the integrated crossbars from the roof rail holders by pulling up the covers . |
3 . Install the bars into the holders .
4 . Make sure that the latches are fitted securely .
! How to change the position of the crossbar s08aj080201
WARNING
Carefully read the warning label attached to the roof rail .
|
2 . Remove the plastic plug of the roof rail holder by using the torque wrench . |
8
Driving Tips
|
|||||
2 . Slide the bars in the direction shown in |
You can change the position of the rear crossbar . To change the position , perform the following procedure .
1 . Take out the torque wrench from the under-floor storage compartment .
|
3 . Remove the bolt of the crossbar by using the torque wrench and pull this side out . |
||||||
– CONTINUED – |