296
Mirrors
! Garage Door Two-Way Communication s03ap110807
HomeLink has the capability of communicating with your garage door opener . HomeLink can receive and display “ closing ” or “ opening ” status messages from compatible garage door opener systems . At any time , HomeLink can also recall and display the last recorded status communicated by the garage door opener to indicate your garage door being “ closed ” or “ opened ”.
HomeLink has the capability of receiving this communication from the garage door opener at a range up to 820 feet ( 250 m ). Range may be reduced by obstacles such as houses or trees . You may have to slow your vehicle speed to successfully receive the garage door opener communication .
! Programming Two-Way Communication s03ap110808
1 Status Indicators
Within five seconds after programming a new HomeLink button , both of HomeLink ’ s garage door status indicators will flash rapidly green indicating that the garage door two-way communication has been enabled . If your garage door status indicators flashed , two-way communication programming is complete .
If the garage door status indicators do not flash , additional HomeLink information and programming videos can be found online at www . HomeLink . com / Subaru and www . youtube . com / HomeLinkGentex .
! Using Two-Way Communication s03ap110809
Press any of the left , center or right buttons to display the main menu . Select HomeLink menu using the left button .
Select “ STATUS ” using the center button .
NOTE
The main menu cannot be displayed on the display while the select lever is in a position other than the “ P ” position .