280
Mirrors programming instructions . step 7 .
1 HomeLink ® indicator light
4 . Press the HomeLink ® button that you would like to program and observe the HomeLink ® indicator light . . If the HomeLink ® indicator light remains constant green , your device should operate when the HomeLink ® button is pressed . At this point , if your device operates , programming is complete .
. If the HomeLink ® indicator light rapidly flashes green , firmly press , hold for two seconds and release the HomeLink ® button up to three times to complete the programming process . At this point if your device operates , programming is complete . If the device does not operate , continue with the next step of the
1 “ Learn ” button
5 . At the garage door opener motor , ( security gate motor , etc .) locate the “ Learn ”, “ Smart ”, or “ Program ” button . This can usually be found where the hanging antenna wire is attached to the motor-head unit ( see the device ’ s manual to identify this button ). The name and color of the button may vary by manufacturer .
NOTE
A ladder and / or second person may simplify the following steps .
6 . Firmly press and release the “ Learn ”, “ Smart ”, or “ Program ” button . You now have 30 seconds in which to complete
7 . Return to the vehicle and firmly press , hold for 2 seconds and release the HomeLink ® button up to three times . At this point programming is complete and your device should operate when the HomeLink ® button is pressed and released .