Conventional Cruise Control
NOTE
• When the ( CRUISE ) switch is first turned on , the Adaptive Cruise Control is activated .
• To change the Cruise Control mode , press and hold the / ( Following distance setting ) switch for approximately 2 seconds or longer . ( This is effective only when the main Cruise Control is on and neither Adaptive Cruise Control nor Conventional Cruise Control are activated .)
• Conventional Cruise Control can be used even when EyeSight is temporarily turned off .
How to use Conventional Cruise Control
■ Setting Conventional Cruise Control
( 1 ) Setting Adaptive Cruise Control to standby status Press the ( CRUISE ) switch . At this time , ( Adaptive Cruise Control indicator ) ( white ) and the following distance setting indicator are displayed on the EyeSight display area of the combination meter display . The set vehicle speed display will read “ - - MPH ( - - - km / h )”. When the ( CRUISE ) switch is pressed , the initial cruise control mode is always Adaptive Cruise Control .
Following distance setting indicator
Adaptive Cruise Control indicator ( white )
S03393
S03414
111