74
Child Restraint Systems
installed on the back side of the rear
seatback.
! To hook the top tether
CAUTION
s01ag0902
! Legacy
s01ag090201
. Always raise the head restraint
when mounting a child restraint
system with a top tether. Failure
to do so may prevent the top
tether from being fastened
tightly.
. If the head restraint is removed,
store the head restraint in the
trunk (Legacy) or the cargo area
(Outback).
. Do not place the head restraint in
the passenger compartment to
prevent it from being thrown
around in the passenger compartment
in a sudden stop or a
sharp turn.
1) When installing on the window-side
seating position
2) When installing on the rear center seating
position
1. Raise the head restraint at the seating
position where the child restraint system is
to be installed with the seatbelt or lower
anchorages.
2. Open the cover flaps to use the
anchorages.
3. Pass the top tether between the head
restraint and seatback.
4. Fasten the top tether hook of the child
restraint system to the appropriate upper