Replacing Bulbs 513
combination light assembly by turning it
counterclockwise.
6. Pull the bulb out of the bulb holder and
replace it with a new one.
7. Set the bulb holder into the rear
combination light assembly and turn it
clockwise until it locks.
4. Slide the rear combination light assembly
straight rearward and remove it
from the vehicle.
8. Reinstall the rear combination light
assembly by sliding the two-pronged part
of the combination light assembly securely
to each holder of the vehicle side.
9. Tighten the upper and lower screws.
10. Reinstall the side cover.
& Backup Light
s11be06
! Legacy
s11be0601
NOTE
It may be difficult to replace the bulbs.
We recommend that you have the bulbs
replaced by your SUBARU dealer if
necessary.
1. Open the trunk.
Maintenance and Service
11
1) Rear turn signal light
2) Rear side marker light
5. Remove the bulb holder from the rear
– CONTINUED –