512
Replacing Bulbs
counterclockwise.
6. Pull the bulb out of the bulb holder and
replace it with a new one.
7. Set the bulb holder into the rear
combination light assembly and turn it
clockwise until it locks.
9. Tighten the upper and lower screws.
10. Reinstall the side cover.
2. Remove the side cover.
! Outback
s11be0502
8. Reinstall the rear combination light
assembly by sliding the two-pronged part
of the combination light assembly securely
to each holder of the vehicle side.
3. Remove the upper and lower screws.
1. Undo the clips. For the method to undo
the clips, refer to “Type C clips” ☞P478.